CAS universal A-pillar tweeter pods give DIYers and installers an open-back housing for custom car audio installs. Choose a single-, dual-, or triple-driver layout in nominal 1″, 2″, 3″, and 3.5″ sizes, then select one pod or a pair.
Please allow 2-3 days for printing Color Black
Choose your configuration
Use the Pod configuration & quantity dropdown. Sizes are nominal and listed from top to bottom. For example, 2″ + 3″ — Pair (2 pods) gives you two identical housings, each with a nominal 2″ opening above a nominal 3″ opening.
Choose a single opening for one driver, a dual tweeter pod for two drivers, or a triple tweeter pod for three. Choose a matching or mixed-size speaker pod layout to suit your drivers. Use the CAD lineup as a visual reference and the dropdown for full size and quantity labels.
Check fitment before ordering
These car audio tweeter mounts use a universal fabrication format with an open back for wiring access and two flat mounting tabs. Your installation may require a vehicle-specific adapter.
Compare each driver’s actual cutout diameter, flange diameter, and mounting depth with the pod and mounting area. Check vehicle clearance behind the housing for the driver, terminals, and wiring, and around the housing for trim and mounting access. Confirm the mounting location with your installer if the area contains an airbag.
Speaker fitment
These are nominal CAD dimensions. The inch sizes in the dropdown identify the configurations. Check your speaker manufacturer’s required cutout, flange outside diameter, and mounting depth before ordering. Include any clearance needed for terminals and wiring.
| Nominal size | Cutout diameter | Assumed flange outside diameter | Design speaker mounting depth | Single-pod cavity depth |
|---|---|---|---|---|
| 1″ | 25.8 mm (1.016″) | 33.4 mm | 18 mm | 26 mm |
| 2″ | 51.2 mm (2.016″) | 58.8 mm | 25 mm | 33 mm |
| 3″ | 76.6 mm (3.016″) | 84.2 mm | 35 mm | 43 mm |
| 3.5″ | 89.3 mm (3.516″) | 96.9 mm | 40 mm | 48 mm |
The flange dimensions are design references. Fit with specific speaker models has yet to be physically verified. Multi-driver pods share an open rear cavity sized for the deepest driver in the configuration, with 8 mm of planned rear wiring clearance.
Housing and mounting
| Feature | Specification |
|---|---|
| Front face | 4 mm thick |
| Sidewall | 3 mm thick |
| Rear mounting tabs | Two flat tabs, 5 mm thick, with 4.5 mm through-holes |
| Driver openings | Circular. Use the retention method specified for your speaker. |
| Vehicle clearance | A vehicle-specific adapter may be required. Check clearance on the vehicle before installation. |
Outside dimensions
All dimensions are in mm. Overall length includes both tabs. Overall depth runs from the front face to the rear mounting plane. Tab spacing is measured center to center.
| Configuration | Overall length × width × depth (mm) | Tab hole spacing (mm) |
|---|---|---|
| 1″ | 66.2 × 41.4 × 30.0 | 50.2 |
| 2″ | 91.6 × 66.8 × 37.0 | 75.6 |
| 3″ | 117.0 × 92.2 × 47.0 | 101.0 |
| 3.5″ | 129.7 × 104.9 × 52.0 | 113.7 |
| 1″ + 1″ | 105.6 × 41.4 × 30.0 | 89.6 |
| 1″ + 2″ | 131.0 × 66.8 × 37.0 | 115.0 |
| 1″ + 3″ | 156.4 × 92.2 × 47.0 | 140.4 |
| 1″ + 3.5″ | 169.1 × 104.9 × 52.0 | 153.1 |
| 2″ + 2″ | 156.4 × 66.8 × 37.0 | 140.4 |
| 2″ + 3″ | 181.8 × 92.2 × 47.0 | 165.8 |
| 2″ + 3.5″ | 194.5 × 104.9 × 52.0 | 178.5 |
| 3″ + 3″ | 207.2 × 92.2 × 47.0 | 191.2 |
| 3″ + 3.5″ | 219.9 × 104.9 × 52.0 | 203.9 |
| 3.5″ + 3.5″ | 232.6 × 104.9 × 52.0 | 216.6 |
| 1″ + 1″ + 1″ | 145.0 × 41.4 × 30.0 | 129.0 |
| 1″ + 1″ + 2″ | 170.4 × 66.8 × 37.0 | 154.4 |
| 1″ + 1″ + 3″ | 195.8 × 92.2 × 47.0 | 179.8 |
| 1″ + 1″ + 3.5″ | 208.5 × 104.9 × 52.0 | 192.5 |
| 1″ + 2″ + 2″ | 195.8 × 66.8 × 37.0 | 179.8 |
| 1″ + 2″ + 3″ | 221.2 × 92.2 × 47.0 | 205.2 |
| 1″ + 2″ + 3.5″ | 233.9 × 104.9 × 52.0 | 217.9 |
| 1″ + 3″ + 3″ | 246.6 × 92.2 × 47.0 | 230.6 |
| 1″ + 3″ + 3.5″ | 259.3 × 104.9 × 52.0 | 243.3 |
| 1″ + 3.5″ + 3.5″ | 272.0 × 104.9 × 52.0 | 256.0 |
| 2″ + 2″ + 2″ | 221.2 × 66.8 × 37.0 | 205.2 |
| 2″ + 2″ + 3″ | 246.6 × 92.2 × 47.0 | 230.6 |
| 2″ + 2″ + 3.5″ | 259.3 × 104.9 × 52.0 | 243.3 |
| 2″ + 3″ + 3″ | 272.0 × 92.2 × 47.0 | 256.0 |
| 2″ + 3″ + 3.5″ | 284.7 × 104.9 × 52.0 | 268.7 |
| 2″ + 3.5″ + 3.5″ | 297.4 × 104.9 × 52.0 | 281.4 |
| 3″ + 3″ + 3″ | 297.4 × 92.2 × 47.0 | 281.4 |
| 3″ + 3″ + 3.5″ | 310.1 × 104.9 × 52.0 | 294.1 |
| 3″ + 3.5″ + 3.5″ | 322.8 × 104.9 × 52.0 | 306.8 |
| 3.5″ + 3.5″ + 3.5″ | 335.5 × 104.9 × 52.0 | 319.5 |
These measurements are per housing. A pair contains two identical housings with the same dimensions.
What’s included
- 1 pod includes one printed housing in the selected configuration.
- Pair (2 pods) includes two identical printed housings in the selected configuration.
Purchase covers the printed housings only. Both images are CAD renders.
Common questions
Does a nominal 3″ driver fit every 3″ opening? Nominal sizes identify the layout. Check actual dimensions before ordering.
Is the pair left- and right-specific? Both housings in a pair are identical.
Will it bolt directly onto my vehicle? The tabs are intended for custom fabrication. Check the mounting location and whether you need a vehicle-specific adapter.
Get the Parts That Work Together
Finish the system with the enclosure, amplifier, wiring, and electrical support your build still needs.
Automatic savings apply in cart when qualifying products are included. No code needed. Need help? Build My System.