CAS Flat Square Bolt-Through Speaker Terminal Plate – 2, 4, 6 & 8 Bolt Options

XS Power
SKU:
CAS-FSTP-M6
$16.99 - $49.99
(No reviews yet)
Weight:
2.00 LBS
Fixed Shipping Cost:
$8.99
Current Stock:
Adding to cart… The item has been added
Questions about compatibility?
Not sure if this product is right for your build? Use Build Help or click the Chatway chat bubble for live assistance.

PLATE ONLY — HARDWARE NOT INCLUDED.

Build a custom speaker or subwoofer enclosure with a flat, non-recessed terminal plate that leaves the front face open for access to ring lugs, nuts, and washers. Each 3D-printed plate has separate positive and negative positions for customer-supplied M6 terminal hardware and four countersunk cabinet mounting holes. Please allow 2-3 days for product to be made.

Configuration and CAD specifications

Positions Square width (in) Thickness (mm) Column C-C (mm) Row C-C (mm) Square mounting pattern C-C (mm)
2 4.25 6.5 60 — 83.95
4 5.25 6.5 74 53 109.35
6 7.50 7.5 90 55 164.50
8 8.50 8 92 52 189.90
  • 2, 4, 6, and 8 positions provide one, two, three, or four positive and negative pairs, respectively.
  • Terminal positions use 6.8 mm through-holes for nominal M6 hardware.
  • Four 4.5 mm corner mounting holes have 9.0 mm countersinks for suitable M4 screws.
  • The drawings show a 32 mm design clearance envelope. Test-fit actual lugs and check wire routing.

Installation

Designed for custom speaker enclosures using nominal 3/4-inch MDF or plywood. Test-fit the plate and hardware, mark the mounting holes, and provide access behind the terminal positions. Use appropriate insulation and keep conductive studs and lugs clear of one another. Seal the plate perimeter and terminal penetrations as needed and check for air leaks before use. Electrical capacity depends on the selected hardware, connections, and installation.

What’s included

One 3D-printed terminal plate in the selected configuration. Supply your own terminal bolts or studs, nuts, washers, ring lugs, mounting screws, insulating bushings, speaker wire, gasket, and sealant. Physical production and fitment validation are pending.

COMPLETE YOUR BUILD

Get the Parts That Work Together

Finish the system with the enclosure, amplifier, wiring, and electrical support your build still needs.

2QUALIFYING ITEMS5% OFF
3QUALIFYING ITEMS7% OFF
4QUALIFYING ITEMS10% OFF

Automatic savings apply in cart when qualifying products are included. No code needed. Need help? Build My System.