Keep large power and ground cable organized with a clean, professional installation. CAS Compression Wire Holders are designed for 0-gauge cable measuring approximately 16 mm outside diameter and are available in configurations from 1 to 10 cables.

The two-piece compression design securely captures the cable without requiring it to be pushed through a snap-style opening. Each holder uses socket-head hardware and threaded heat-set inserts for easy installation, removal, and reuse.

Features

Available for 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10 cables
Designed for approximately 16 mm OD 0-gauge cable
16.2 mm cable channels
Two-piece compression-clamp construction
Raised CAS logo
M4 socket-head cap screws
Metal heat-set inserts for durable threads
Rounded edges for a clean finished appearance
Ideal for amplifier racks, battery banks, power distribution, and custom car-audio installations

Important Fitment Information

Cable labeled as 0 gauge can vary in outside diameter between manufacturers. Measure the outside diameter of your cable before ordering. These holders are designed around a 16 mm cable OD.

Do not overtighten. Tighten the screws only until the cable is held securely and cannot slide.

Included

Each quantity includes:

One complete compression wire holder
Matching top and bottom sections
M4 socket-head hardware
Installed or included M4 heat-set inserts, depending on the selected product option
Package qty cable
1 cable 20
2 cable 15
3 cable 15
4 cable 15
5 cable 6
6 cable 6
7 cable 3
8 cable 3

CAS Compression Wire Holder Dimensions
All dimensions are listed as Width × Depth × Height.

1-Wire Holder: 44 mm × 19 mm × 22.1 mm

2-Wire Holder: 54 mm × 19 mm × 22.1 mm

3-Wire Holder: 80 mm × 19 mm × 22.1 mm

4-Wire Holder: 106 mm × 19 mm × 22.1 mm

5-Wire Holder: 132 mm × 19 mm × 22.1 mm

6-Wire Holder: 158 mm × 19 mm × 22.1 mm

7-Wire Holder: 184 mm × 19 mm × 22.1 mm

8-Wire Holder: 210 mm × 19 mm × 22.1 mm

9-Wire Holder: 236 mm × 19 mm × 22.1 mm

10-Wire Holder: 262 mm × 19 mm × 22.1 mm

Additional Measurements
Designed cable outside diameter: approximately 16 mm

Cable-channel diameter: 16.2 mm

Cable center-to-center spacing: 26 mm

Top section height: approximately 10.6 mm plus raised CAS logo

Bottom section height: approximately 10.6 mm

Assembled overall height: approximately 22.1 mm

Please note: Cable labeled as 0 gauge can vary in outside diameter by manufacturer. Customers should measure their cable before ordering.

Made by Crystal Audio Solutions for clean, organized, show-quality cable management