Product Description
JP 95 AMP: 1500w total RMS 5 Channel Amplifier
The JP95 might be the most practical 5 channel amplifier ever to hit the market. R&D in Las Vegas, NV & Dunnellon FL. The Heatsink carries over from the JP23. The red color takes from the OG days of Down4Sound and Car Audio, we call it Radiant Red.
Inside the JP95 is a fan cooling the output side; now it has plexi black plate, and Bass Knob with voltage and temperature meter.
fan turns on at 120 degrees F
OUR STANDARD 1 YEAR MANUFACTURE DEFECTS ONLY | JUST LIKE ANY MANUFACTURE.
The warranty doesn't mean we cover it if you hook it up wrong or launch it out a potato launcher or someone dropped it or if your ex comes by and steals it. It also doesn't cover you feeding it the wrong voltage distorting it malfunction, or you submarining it in your vehicle. This Version IS NOT Marine Grade.
OUR Ratings: ( We rate on worst case scenario)
- RMS power, 1ohm for CH5: 900W x 1
- RMS power, 2ohm: 200W x 4 + 700W x 1
- RMS power, 4ohm: 120W x 4 + 400W x 1
- RMS power, 4ohm Bridged :400W x 2
INDEPENDENT 3RD PARTY TESTING RESULTS : Big D WIZ TESTED ON SMD AMPLIFIER DYNO
- RMS power, 1ohm for CH5 BASS CH: 1212 W x 1
- RMS power, 4ohm: 120W x 4 Channels + Bass Ch: 482 Watts RMS x 1
- RMS power, 2ohm: 200W x 4 Channels + Bass Ch: 816 Watts RMS x 1
JP95 Tuning Specs:
CH1 & CH2
- High Pass Filter: 20Hz - 5KHz
CH3 & CH4
- High Pass Filter: 20Hz - 500Hz
- Low Pass Filter: 50(500)Hz - 500(5K)Hz
- Low pass Filter Multiply: x1, x10
CH5 (BASS CHANNEL)
- Subsonic Filter: 10Hz - 50Hz
- Low Pass Filter: 35Hz - 250Hz
- Bass Boost: 0 - 9dB
Frequency Response
- 10Hz - 30KHz for CH1 - CH4, 10Hz - 240Hz for CH5
Remote Bass Knob: Voltmeter & Temperature display remote control included
Input Sensitivity: 6V - 0.2V
Signal to Noise Ratio: 95dB <
T.H.D @ 4ohm: less than 0.1%
Operating voltage : 9 to 16 Volts
Fuse Rating: 160A
Length ( inches ): 17.71" 7.4" W x 2.24" H
Reviews
-
Jp 95
Great power great sound working perfectly
