Product Description
Orders will be filled in 2-8 weeks. There is a backorder and "in stock" does not seem probable for a while. Best way to get one is place your back order and wait the 2-8 weeks for it to be made to order. Orders are being fulfilled directly from LF and CAS cannot provide status updates.
WVC:
The WVC (wireless volume controller) is our no-frills barebones volume attenuation solution. For a more advanced version, please check out the WVC-PRO.
A "wireless bass knob" runs over a custom protocol on the 2.4ghz band (with dedicated 20.5dBm transmitter and 6dBi omnidirectional antenna) to give you long-range mission-critical style control over the volume of your system.
You no longer have to endure the brunt of your monstrous ear-shattering system while giving demos. Step outside of your cabin and control your volume with this wireless knob!
WVC PRO:
The WVC-PRO (wireless volume controller pro) is our top of the line volume attenuation and data telemetry solution designed for the most serious bassheads!
A "wireless bass knob", voltmeter, and temperature meter all-in-one runs over a custom protocol on the 2.4ghz band (with dedicated 20.5dBm transmitter and 6dBi omnidirectional antenna) to give you long-range mission-critical style control over the volume of your system. The remote out line allows you to use the built in safety features to automatically turn off your amplifier if the voltage drops too low or the amp gets too hot.
You no longer have to endure the brunt of your monstrous ear-shattering system while giving demos. Step outside of your cabin and control your volume with this wireless knob!
WVC vs WVC PRO:
| WVC | WVC PRO | |
| Voltmeter built-in | yes | yes |
| Temperature Probe | no | yes |
| Max RCA voltage level supported | 15VAC | 15VAC |
| Volume attenuation / gain | -95.5 to +31.5dB | -95.5 to +31.5dB |
| Oscilloscope mode | no | yes |
| Frequency band detection / equalizer visualizer | no | yes |
| RCA Clip Detection | no | yes |
| THD+N at 1V RCA level | < 0.0004% | < 0.002% |
| THD+N at 5V RCA level | < 0.0007% | < 0.0004% |
| Remote out 12v pin - can drive 1 amp load | no | yes |
| Intelligent Drive System® - Turn off amps if too hot / voltage too low when using remote out pin to turn on amplifiers | no | yes |
|
with wrist strap |
no | yes |
| Knob Mount | no | yes |
|
to accommodate protective TPU case |
no | yes |
| USB-A to USB-C braided knob | yes | yes |
