B2 Audio Rage 4500.1 Amplifier

The B2 Audio Rage 4500.1 has been iconic in it’s ability to provide the latest technology and smaller sized foot print never before seen in current driven half bridge amplifier design. Most amplifiers are twice the size of the rage series, proving difficult for installation and heat management. B2 Audio was able to solve these issues by commissioning a whole new heavy duty 3 oz PCB and heatsink design with the best possible electronic components available allowing this amplifier to meet the most demanding challenges and provide the best value possible. Don’t be fooled by the small footprint though, in our testing this amplifier has seen north of 8500 watts rms and has been extensively tested for stability and reliability even driven at the low ohm loads. Also featuring B2 Audio’s new Current Adaptable Performance technology (CAP) the Rage 4500.1 has a wide operational voltage of 10 to 17 volts DC allowing it to be optimized to newer battery technologies such as LTO Lithium that require higher charging voltages than normal AGM batteries.

• SPECIFICATIONS RAGE 4500.1
• Frequency Response: 10 Hz ~ 300 Hz
• Signal to Noise Ratio: >95 dB
• Input Sensitivity: 5 V ~ 0.2 V
• Low Pass Crossover 24 db/ Oct: 35 Hz ~ 250 KHz
• Bass Boost: 0 ~ 9 dB
• Bass Boost Frequency Range: 45 Hz
• Damping Factor: >400
• Power Terminal gauge: 0 GA x 3
• Fuse Rating: 400 A
• Operational voltage: 9 V ~ 17 V
• Dimensions: 5” x 8.7” x 2.55”
• Power @ 4 Ω 14.4 V: 1600 w
• Power @ 2 Ω 14.4 V: 3000 w
• Power @ 1 Ω 14.4 V: 4500 w
• Dynamic Power @ 4 Ω 14.4 V: 1900 w
• Dynamic Power @ 2 Ω 14.4 V: 3500 w
• Dynamic Power @ 1 Ω 14.4 V: 7000 w
• Dynamic Power @ 0.8 Ω 14.4 V: 7700 w
• Dynamic Power @ 0.67 Ω 14.4 V: 8795 w

wiring below 1 ohm may void manufacturer

defect warranty, user accepts all risks

*In order to get the full power output of the amplifier, it is crucial that your electrical system is correctly (over) dimensioned. Failure to upgrading will constrain the power output & lower the efficiency which can cause damage to the amplifier &  void the warranty. This also includes ohm loads below of what is written in the manual. Do take your time and read the manual thoroughly prior to installing! **Marine capable products are not to be subjected directly to water, but has the ability of being functional in humid conditions.